339 High Heat-Resistant Spray Adhesive - For Wood, Laminate, Car Interiors

Table of Contents

339 HIGH-TEMPERATURE RESISTANT SPRAY ADHESIVE

339 spray adhesive has a super-strong bond and withstands all hot and cold temperatures, so it is well suited to materials that are often exposed to high temperatures.
With extremely high heat resistance, it adapts easily to all weather conditions and bonds easily on many kinds of materials used outdoors in the sun.
Đặc biệt được sản xuất bằng nguyên liệu nhập khẩu từ Mỹ, Đức, Nhật. Keo có chứa Toluene nên cần thi công ở nơi thông gió tốt, tránh xa lửa và trang bị khẩu trang, găng tay.
In addition, 339 spray adhesive is made with new, professional technology, so its adhesion and durability are optimal.

339 spray adhesive is light yellow with medium viscosity, very easy to use, and a very mild odor.
339 spray adhesive is made with new technology and advanced engineering, so it resists high temperatures very well.
Besides resisting high temperatures, 339 spray adhesive has a super-strong, super-durable bond.
339 multi-purpose spray adhesive does not produce stringing when sprayed, unlike other spray adhesives on the market.

Products bonded with 339 spray adhesive achieve absolute adhesion and long-lasting durability.
The adhesive has medium viscosity and high bonding strength, and can bond many kinds of materials.
For use with spray machines, it sprays easily without fraying or clumping, and the adhesive penetrates the surface very evenly.
It saves 50% - 60% compared with other adhesives, saving labor cost and application time and achieving high economic efficiency in production.
Easy to use: just spray a thin layer on one surface, then bond the two surfaces together. Wait 10-15 minutes and the product will bond together extremely firmly.

339 super-strong spray adhesive is used on many different materials such as: car interiors, wood interior decoration, PVC sheets, acrylic sheets, mica sheets, imitation leather, ...
339 multi-purpose spray adhesive is well suited to production lines or manual application.
It can be used with a spray gun and an air compressor, or applied by hand with a roller.

Check the air compressor before spraying. There must be no water in the machine, and the air hose and spray gun must also be dry.
Air compressor pressure should be 4 kg or higher.
We recommend a spray nozzle of 3.0 or larger. Use a small nozzle for short spraying distances and a larger nozzle for longer distances.
Clean and dry the surfaces to be bonded.
Spray the adhesive evenly on one surface to be bonded. Do not spray too little, too thick or too thin. Do not let the adhesive run or drip while spraying.
After spraying, bond within the allowed time of 10-15 minutes depending on the material. Wait for the adhesive surface to dry; once dry, you can bond. But do not let the adhesive surface get too dry, as this will affect bonding strength. After bonding, apply pressure to the product to achieve optimal adhesion.