EVA foam slippers are light and soft, but with long use the straps come off, soles separate or edges tear. Buying a new pair is costly, and re-bonding with ordinary glue tends to peel right away. This article guides you on how to bond EVA foam slippers and choosing a suitable adhesive so the bond lasts longer.
Why are foam slippers hard to bond?
- Smooth surface that grips adhesive poorly: EVA foam has a smooth surface, so ordinary adhesive often struggles to grip firmly.
- Stretchy foam: slippers flex continuously when walking, and a hard adhesive layer easily cracks and peels.
- Dirty, damp or oily: sweat and dust prevent the adhesive from gripping.
Choosing adhesive for foam slippers
Recommended shoe adhesive chuyên dụng dạng keo dung môi, cho lớp keo mềm dẻo sau khi khô. Các sản phẩm tham khảo của Sư Tử Vàng:
- 405A shoe adhesive: for slippers, leather shoes, imitation leather, rubber and PU.
- Keo PU HP-333: used when bonding EVA, PVC and PU soles.
- PU and PVC treatment agent: brush on before bonding if the surface is smooth and hard to bond.
Each slipper type and foam material may react differently, so test-bond a small spot before bonding the whole pair.
How to re-bond peeled foam slippers: 5 steps

- Clean. Wash the slippers, wipe dry and let dry completely. Scrape off any old adhesive.
- Lightly sand. Lightly sand both surfaces to be bonded so they are slightly rough and the adhesive grips more easily.
- Apply adhesive to both surfaces. Brush a thin, even layer of adhesive on both surfaces; do not apply too thickly.
- Wait until the adhesive turns tacky. Let the adhesive dry naturally until it feels tacky to the touch, sticky but not smearing on your hand.
- Press firmly. Align correctly then press firmly, holding with clamps or a weight. Let the adhesive settle before wearing.
Common mistakes
| Mistake | Cause | How to avoid it |
|---|---|---|
| Peels again a few days after bonding | Wet, dirty or unsanded surface | Clean, let dry, lightly sand |
| Adhesive does not grip, sticks in patches | Applying to only one surface or pressing while the adhesive is wet | Apply to both surfaces, wait until tacky, then press |
| Foam edges shrink and wrinkle | Applying adhesive too thickly | Apply a thin, even layer |
Notes when using solvent-based adhesive
Shoe adhesive is flammable and has a solvent odor. Work in a ventilated place, keep away from flames, use gloves and a mask, and close the lid tightly after use. See also the information on the product packaging.
Reference price
405A adhesive 3 kg can priced from 450,000 VND, contact us for a quote by quantity. See also: how to re-bond a peeled shoe sole, leather shoe adhesive, What is adhesive?
The prices above exclude 8% VAT. Prices shown in the store include VAT.
Frequently asked questions
What adhesive should be used for peeled foam slippers?
Use dedicated shoe adhesive for a flexible adhesive layer, such as 405A adhesive or HP-333 PU adhesive. If the surface is smooth, brush on treatment agent before bonding.
Is it necessary to apply adhesive to both surfaces?
Yes. Brush a thin layer of adhesive on both surfaces, wait until tacky and then press so the bond is firm.
View all adhesive products Su Tu Vang industrial adhesives by material.



