SPRO Spray Adhesive - For Veneer Sheets
What Is Veneer Wood Spray Adhesive?
- Veneer, also called sliced wood, is a thin board sliced from natural round logs, with a typical thickness of about 0.3-0.6 mm and usually not exceeding 3 mm (1/8 inch).
Veneer sheets can be used for high-end decoration such as car interiors and musical instruments: violins, guitars... - In Vietnam, veneer is widely used in producing furniture and flooring, by bonding veneer sheets onto engineered wood boards such as MDF, MFC, plywood, finger-jointed wood, mixed wood, wood chip board...
SPRO Veneer Wood Spray Adhesive:
- SPRO super-strong multi-purpose veneer wood spray adhesive is specialized for interior construction, bonding plywood, veneer, laminate, mica, aluminum composite sheets, WPC wood-plastic, PVC plastic, WPB sheets, plywood, vinyl flooring, fabric, leather, foam and rubber together.
- SPRO spray adhesive combined with a spray machine sprays easily, with no stringing or clumping, saving cost and construction time
- Spray the adhesive indoors or in a shaded place; direct sunlight will make the adhesive age quickly and affect product quality.
- The allowed application temperature is 25°C - 40°C.
- Adhesive bonding time is 5 - 15 minutes, fully hardened after 26 hours.
- Maximum allowed heat resistance is 70°C in shade, without direct sunlight or heat absorbed and radiated through glass.
The product is developed with a Toluene-free formula, reducing unpleasant odor during application while meeting modern production needs and aiming at a safer working environment for workers.
Thanks to good adhesion, high coverage and fast application with a spray gun, S-PRO spray adhesive is trusted by many furniture workshops, veneer processing units and wood furniture factories.
Applications of S-PRO Veneer Spray Adhesive
S-PRO spray adhesive is widely used in many furniture manufacturing fields such as:
* Bonding natural veneer onto MDF.
* Bonding engineered veneer onto engineered boards.
* Producing engineered wood doors.
* Making kitchen cabinets and wardrobes.
* Producing furniture tables and chairs.
* Bonding decorative surfaces on wood products.
* Processing office furniture.
* Producing apartment and hotel furniture.
How to Use Veneer Wood Spray Adhesive:
- Check the air compressor before spraying. There must be no water in the machine, and the air hose and spray gun must also be dry.
- We recommend a spray nozzle of 3.0 or larger. Use a small nozzle for short spraying distances and a larger nozzle for longer distances.
- Air compressor pressure should be 4 kg or higher.
- Spray SPRO adhesive evenly and enough to fully cover both surfaces. Spraying distance is 15 cm - 30 cm between the gun tip and the material surface. Hold the gun tip nearly perpendicular to the surface being sprayed.
- Spray the adhesive evenly on both surfaces to be bonded. Do not spray too little, too thick or too thin. Do not let the adhesive run or drip while spraying.
- After spraying, bond within the allowed time (5-10 minutes depending on the material) so the adhesive surface can dry. Press lightly on the adhesive with a finger: if it does not stick to your finger, you can bond. Do not let the adhesive surface dry out too much, as this will reduce bonding strength. After bonding, apply pressure to the product to achieve optimal adhesion.
Storage:
- Keep away from fire and electrical outlets during use.
- Do not let the adhesive come into contact with water or get wet, as this will destroy its properties. Store in a cool place, away from direct sunlight.
- Test before putting into use and production to make sure the bonding quality is optimal. Stir the adhesive well before use.
SEE MORE SPRAY ADHESIVES : HERE
For reference, small-can retail prices on the official Shopee >>> here
Sizes: 200 g tin, 600 g tin, 3 kg can, 15 kg drum, 180 kg barrel
