5 Common Mistakes When Gluing Shoes in Production and How to Fix Them

Bonding shoes seems simple, but one small wrong step makes soles peel, shoe edges open or the adhesive yellow after a few weeks of use. For a workshop, every defective pair means warranty cost and lost customer trust. Below are the 5 most common mistakes in industrial shoe bonding and how to fix each one.

1. The bonding surface is not clean or still has grease

This is the leading reason adhesive fails to bond. Dust, oil, wax or mold-release agent left on the sole and upper form a barrier layer between the adhesive and the material.

How to fix it: clean thoroughly with a suitable solvent and let the surface dry completely before brushing adhesive. For hard-to-bond materials such as PU, PVC and synthetic rubber, treat the surface before applying adhesive to increase adhesion.

2. Adhesive applied too thick or unevenly

An adhesive layer that is too thick dries poorly, traps solvent inside and weakens the bond. Under-brushing or missing the edges makes shoe edges open easily.

How to fix it: brush a thin, even coat of adhesive on both surfaces, paying close attention to edges and corners. If the material absorbs a lot of adhesive (such as suede, fabric, foam), you can apply a second coat after the first has become tacky.

3. Bonding before the adhesive has tacked up, or after it has dried too much

Bonding while the adhesive is still wet traps solvent and the bond is not firm. Conversely, leaving the adhesive to dry too long makes it lose surface tack and no longer bond.

How to fix it: wait for the adhesive to dry to a tack, usually about 10-15 minutes depending on coat thickness and weather conditions. Lightly touch the surface; if it no longer feels sticky to the hand, you can bond. If left too long, it can be reactivated with heat or a thin extra coat of adhesive.

4. Insufficient pressing force

Shoe adhesive needs pressing force so that the two adhesive layers contact and bond fully. Pressing lightly by hand often prevents the bond from reaching maximum strength.

How to fix it: use a press machine or rubber mallet, pressing evenly over the whole surface for long enough. The more even and strong the pressure, the higher the bond strength.

5. Wrong adhesive for the material

Each adhesive suits certain materials. Using ordinary adhesive on PVC or EVA soles, or bonding light-colored shoes with a yellowing-prone adhesive, gives poor results even with correct handling.

How to fix it: choose adhesive by the material to be bonded. For example, keo PU HP-333 suits bonding shoe soles and hard-to-bond materials, while 405A shoe adhesive is flexible for many materials such as leather, fabric, foam and sponge. You can also read the article comparing 405A adhesive and PU HP-333 adhesive to choose the right one.

Notes after bonding

Let the product rest for at least 24 hours before use or packaging so the bond reaches optimal durability. Store adhesive in a dry, cool place, close the lid tightly after use, keep away from fire and out of reach of children. Test on a small sample before mass production.

Need advice on choosing adhesive or fixing peeling problems in production? Contact hotline 0976.884.341 for free technical support. Read more: What is shoe adhesive? Types and how to choose.

See also: shoe adhesive dedicated adhesives from Su Tu Vang and the article what is adhesive.

View all adhesive products Su Tu Vang industrial adhesives by material.

Golden Lion
Golden Lion adhesives - Hoan Bao Co., LtdIndustrial adhesives: spray glue, shoe glue, PU glue, all-purpose glue for most materials.

Products

Contact

Floor 12B, Cienco4 Building, 180 Nguyen Thi Minh Khai, Vo Thi Sau Ward, District 3, Ho Chi Minh City
keodansutu@gmail.com
Scroll to Top
Return & refund policy | Shipping policy | Payment methods | Privacy policy | Pricing policy | Complaint handling | Terms and restrictions
🛒 Cart 0