Description

Hydro-Block Additive ( H2 )

(Water-proofing and Fortifying Agent)

    1. Introduction:

• H2 is a water-proofing emulsion additive that is free of health and environmental risks. This product is meant to be mixed with cement (32.5), concrete, paving sand, and other related products.
• This sealant can be used for projects requiring waterproofing such as: construction of housing structures, basements, garages, restrooms, roofing, pools, fish tanks, and any other heavy-duty projects.2. 

    2. Characteristics:

• Hydro-Block Additive is created with inorganic and organic compounds that allow it to be a highly water-proofing agent.
• The product has a large-scale ability to expand and shrink, this ensures thorough water-proofing. It is stable, long-lasting, and easy to use.

    3. Instructions:

• Thoroughly clean and dry surface. Surface must be free of oils, dust, and chemicals. Ensure that all cracks and blemishes on the surface are fixed before application.
• The surface must have slight moisture before application, lightly spray with water and wipe dry. For best results, apply in temperature from 5ºC to 35ºC.
• Mixing Ratio: Mix the Hydro-Block Additive with sand, cement, CaCO₃, or other related products. The mixing ratio is 1 to 1, use equal parts of the Hydro-Block Additive as the cement or sand necessary. Mix until completely smooth. Once additive is activated, use within an hour.
• Apply 3 to 4 layers of the mixture to obtain a thickness of 1.2 to 1.5 mm.
• 5 kg can cover 1 m² with a thickness of 1.5 mm.
• Wait 2 to 5 hours between coats.
• Check for bubbles and cracks between every coat. Reapply mixture to necessary places.
• Apply carefully on corners, use even and smooth strokes.

    4. Attention:

• Avoid direct sunlight on the surface when drying. If the temperature is too hot, try to cool the surrounding areas with water.
• Cover up surfaces if it begins raining during drying process.
• Small quantities of water can be added to mixture if it is too thick.

    5. Storage:

• Seal tightly to store.
• If not sealed, use within 30 minutes to avoid hardening.
• Mix well before use.

The Hydro-Block Additive is the newest innovation in water-proofing products. It is free of health and environmental risks.